Command Arms  AR15 Accessories and Handgun Holsters

Leading online Police equipment supplier
Charge your Police equipment needs
police%20line800p.bmp (800x12 -- 10678 bytes)

Your AR-15 Accessory Headquarters. With decades of experience designing homeland defense products for the Israeli military, First Samco and Fobus has  expanded  their product line. In today's world, Command Arms products have become very important tofobuslogo.gif (131x78 -- 2270 bytes) Civilian, Law Enforcement, and Military groups all over the world. Their recent focus has been on the development of an innovative mounting system for the M16 - AR15 along with popular accessories to compliment the M-33 &M-44 Handguards. Cool Cop Gear also stocks the full line of Fobus paddle holsters for most of the quality handguns available in today's market.  The Fobus paddle holsters have proven to be a high quality product at a low cost investment.

m33small.jpg (125x94 -- 3898 bytes)

M-33

$69.95

Built to military specification, the M-33 will fit all M-16/AR15 style carbine rifles. Produced from special high density polymers injected into ultra precision molds, with rails molded directly into the handguards top and bottom halves. The rails will accept any accessory with a Picatinny or weight added to the handguards. Lasers, lights, optics, bi-pods, and other mission specific accessories can be easily mounted on the rails. A sliding cover is provided to protect the rails when not in use and enhance the operator's grip upon the handguards. The use of a stainless steel heat shield within the M-33 handguard acts as a heat sink to dissipate the high temperatures encountered during sustained rapid fire sequences. Fits 16" M4 Style AR15 Rifles

m44small.bmp (125x83 -- 31262 bytes)

M-44S (16")

M-44L  (20")

$104.00

Built to military specifications for the M16/AR15. The M44 incorporates 4 mounting rails allow the use of any accessory with a Picatinny or Weaver® base, including lasers, lights, optics and bi-pods. The operator will not notice additional bulk or weight as the rails are designed to be an integral part of the handguard. Thermal rubber rail covers enhance the operator’s grip and protect the rails when not in use. A metal heat shield dissipates the high temperatures produced during sustained rapid fire sequences. The carbine length (M44S) is currently available. No tools or gunsmithing required for installation.  M-44S Fits the 16" Barreled AR's and the M-44L fits the 20" barreled AR15s.

psitolgripsmall.jpg (100x150 -- 4259 bytes)

G-27

$21.95

The First Samco Tactical Hand Grip is sure to increase the performance of your rifle or carbine. Made from their own proven synthetic materials, it incorporates finger swells and a backstrap that is designed with surfacing to enhance your grip and minmize the chance of slippage should the G-27 become wet.
The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold upon the G-27, while protecting the web of your hand . Also, the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area. The Tactical G-27 is designed to be ambidextrious and installs quickly. The Grip carries the First Samco / Fobus Lifetime Replacement Guarantee.

arvertgripsmall.jpg (100x150 -- 4206 bytes)

VG-1

$39.95

The First Samco Vertical Grip was developed to fit handguards equipped with a Weaver or Picatinny rail system. Use of the VERTICAL GRIP will allow a natural "fighting stance" hold on your rifle. By positioning your hands with one on the pistol grip and the other on the VERTICAL GRIP, improvement in both the reaction time needed to get "on target" and muzzle control during rapid fire will be noticed. The VERTICAL GRIP may be positioned, and held firmly, on the rail by simply pressing the lock button and sliding the GRIP to the intended location and then releasing. No tools or gunsmithing required for installation.

M16MCLsmall.jpg (125x105 -- 4435 bytes)

M16MC

$11.95

The First Samco Mag Coupler joins two magazines for the .223 M16/AR15 for greater ammunition capacity. It holds the magazines with rock like strength and will not scratch or deform mags. These are standard issue for the Israeli Military and can be used in either a parallel or staggered position. Lightweight and fiberglass reinforced with the Fobus / First Samco Lifetime Warranty!

universalmountsmall.jpg (125x74 -- 3752 bytes)

FBS-Bipod

$27.95

Developed to fit handguards equipped with a Weaver or Picatinny rail system.  Use of this MOUNT allows the attachment of a bipod, or any other piece of equipment, requiring a mounting stud.  The MOUNT may be positioned, and held firmly, on the rail by simply pressing the lock button and sliding the MOUNT to the intended location and then releasing. No tools or gunsmithing is required and quick removal to allow installation of another rail mounted accessory is easily accomplished.

FAS2samll.jpg (125x157 -- 7217 bytes)

FAS2

$31.95

Fobus USA, First Samco Tactical Accessories for Flashlight Mount Surefire 6P for Picatinny and Weaver Rail Systems.
 

AR15 Accessories Home Page

 
 

 

Featured Products.

 

Shotgun Accessories Shotgun accessories for the professional operator and the discriminating civilian.

from Advanced Technologies

 


qty:

Last update 03-13-2008
 

Accu-Wedge, Advanced Technology (ATI)Advantage Arms,  ASPBadges, BattleGrip, Blackhawk, BooksBuffer Technologies, Bulldog Cases,  Don HumeDoskocil Eagle Industries Eberlestock, Eotech,  First Samco,  Fobus, Gapper, Glock, Hogue, Insight Technologies,     LasermaxLeupoldL.U.L.A., Mag Cinch MagPul, MechtechPelican,  Perfect fit USARedi-mag, Speedfeed StocksSurefireTacstar,   Uncle MikesLinks Page.

  We accept Mastercard, Visa and Discover card for all purchases as well as Paypal.